|
|
Registros recuperados : 31 | |
1. | | CLARO, P. I. C.; BUFALINO, L.; MARCONCINI, J. M. Estudo da propriedade mecânica de filmes de nanocelulose oriundos do madereiro da amazônia. In: SIMPÓSIO NACIONAL DE INSTRUMENTAÇÃO AGROPECUÁRIA, 2014, São Carlos, SP Anais do SIAGRO: ciência, inovação e mercado 2014. São Carlos, SP: Embrapa Instrumentação, 2014. p. 427-230. Editores: Carlos Manoel Pedro Vaz, Débora Marcondes Bastos Pereira Milori, Silvio Crestana. Página 230 em branco Biblioteca(s): Embrapa Instrumentação. |
| |
3. | | PROTÁSIO, T. de P.; BUFALINO, L.; GUIMARÃES JUNIOR, M.; TONOLI, G. H. D.; TRUGILHO, P. F. Técnicas multivariadas aplicadas à avaliação de resíduos lignocelulósicos para a produção de bioenergia. Ciência Florestal, Santa Maria, RS, v. 23, n. 4, p. 771-781, out./dez. 2013. Biblioteca(s): Embrapa Florestas. |
| |
5. | | MENDES, L. M.; MENDES, S. A.; MENDES, R. F.; BUFALINO, L.; PROTÁSIO, T. de P. Umidade de equilíbrio de painéis osb de clones de Eucalyptus urophylla. Cerne, Lavras, v. 20, n. 4, p. 519-528, 2014. Biblioteca(s): Embrapa Florestas. |
| |
6. | | PROTÁSIO, T. de P.; TONOLI, G. H. D.; GUIMARÃES JUNIOR, M.; BUFALINO, L.; COUTO, A. M.; TRUGILHO, P. F. Correlações canônicas entre as caracteristicas químicas e energéticas de resíduos lignocelulósicos. Cerne, Lavras, v. 18, n. 3, p. 433-439, jul./set. 2012. Biblioteca(s): Embrapa Florestas. |
| |
7. | | ALBINO, V. C. do S.; SÁ, V. A. de; BUFALINO, L; MENDES, L. M.; ALMEIDA, N. A. Avaliação das propiedades físico-mecânicas de painéis compensados de Toona ciliata M. Roem. var australis. Cerne, Lavras, v. 17, n. 1, p. 103-108, jan./mar. 2011. Biblioteca(s): Embrapa Florestas. |
| |
9. | | RAABE, J.; BUFALINO, L. FONSECA, A. S.; RIBEIRO, C.; MARTINS, M. A.; MARCONCINI, J. M.; TONOLLI, G. H. D. Evaluation of reaction factors for deposition of silica (SiO2) nanoparticles on cellulose fibers. Carbohydrate Polymers, Barking, v. 114, p. 424-431, 2014. Biblioteca(s): Embrapa Instrumentação. |
| |
10. | | BUFALINO, L.; MENDES, L. M.; TONOLI, G. H. D.; COSTA, T. G.; CAIXETA, L. A.; MARCONCINI, J. M. Isolamento da celulose de madeiras amazônicas para a proução de nanofibras: análise preliminar. In: WORKSHOP DA REDE DE NANOTECNOLOGIA APLICADA AO AGRONEGÓCIO, 7.; ESCOLA DE NANOTECNOLOGIA, 3., 2013, São Carlos, SP. Anais... São Carlos, SP: Embrapa Instrumentação, 2013. p. 211-213 Editores: Maria Alice Martins, Odílio Benedito Garrido de Assis, Caue Ribeiro, Luiz Henrique Capparelli Mattoso. CD-ROM. Editores: Maria Alice Martins, Odílio Benedito Garrido de Assis, Caue Ribeiro, Luiz Henrique Capparelli Mattoso. Biblioteca(s): Embrapa Instrumentação. |
| |
11. | | MORAES, L. G.; ASSIS-PEREIRA, G. de; PROTÁSIO, T. de P.; BUFALINO, L.; GONÇALVES, D. de A.; TOMAZELLO-FILHO, M. Dendrocronologia e densitometria de raios X aplicados na avaliação das propriedades do lenho de árvores de Tachigali vulgaris, na Amazônia. In: WORKSHOP ONLINE FLORESTAS DE TACHIGALI VULGARIS, 1., 2021, Colombo. Anais. Colombo: Embrapa Florestas, 2022. p. 99-111. (Embrapa Florestas. Documentos, 377). Biblioteca(s): Embrapa Amazônia Oriental. |
| |
12. | | LOPES, T. A.; BUFALINO, L.; CLARO, P. I. C.; MARTINS, M. A.; TONOLI, G. H. D.; MENDES, L. M. The effect of surface modifications with corona discharge in pinus and eucalyptus nanofibril films. Cellulose, v. 25, n. 9, p. 5017-5033, set. 2018. 5017-5033 Biblioteca(s): Embrapa Instrumentação. |
| |
14. | | BUFALINO, L; MENDES, L. M.; TONOLI, G. H. D.; RODRIGUES, A.; FONSECA, A.; CUNHA, P. I.; MARCONCINI, J. M. New products made with lignocellulosic nanofibers from Brazilian amazon forest. In: INTERNATIONAL CONFERENCE ON STRUCTURAL NANO COMPOSITES, 2., 2014, Madrid. IOP Conference Series: Materials Science and Engineering, v. 64, 2014, p. 012012. Biblioteca(s): Embrapa Instrumentação. |
| |
15. | | PROTÁSIO, T. de P.; BUFALINO, L.; TONOLI, G. H. D.; COUTO, A. M.; TRUGILHO, P. F.; GUIMARÃES JÚNIOR, M. Relação entre o poder calorífico superior e os componentes elementares e minerais da biomassa vegetal. Pesquisa Florestal Brasileira, Colombo, v. 31, n. 66, p. 113-122, abr./jun. 2011. Biblioteca(s): Embrapa Florestas. |
| |
16. | | RIBEIRO, M. X.; BUFALINO, L.; MENDES, L. M.; SÁ, V. A. de; SANTOS, A.; TONOLI, G. H. D. Resistência das madeiras de pinus, cedro australiano e seus produtos derivados ao ataque de Cryptotermes brevis. Cerne, Lavras, v. 20, n. 3, p. 433-439, jul./set. 2014. Biblioteca(s): Embrapa Florestas. |
| |
17. | | RAABE, J.; FONSECA, A. de S.; BUFALINO, L.; RIBEIRO, C.; MARTINS, M. A.; MARCONCINI, J. M.; MENDES, L. M.; TONOLI, G. H. D. Biocomposite of cassava starch reinforced with cellulose pulp fibers modified with deposition of silica (SiO2) nanoparticles. Journal of nanomaterials, [S. l.], v. 2015, p. 1-9, 2015. Biblioteca(s): Embrapa Instrumentação. |
| |
18. | | LEITE, E. R. da S.; PROTÁSIO, T. de P.; ROSADO, S. C. da S.; TRUGILHO, P. F.; TONOLI, G. H. D.; BUFALINO, L. Avaliação da qualidade da madeira de Coffea arabica L. como fonte de bioenergia. Cerne, Lavras, v. 20, n. 4, p. 541-549, 2014. Biblioteca(s): Embrapa Florestas. |
| |
19. | | CÉSAR, A. A. da S.; MENDES, L. M.; BUFALINO, L.; PROTÁSIO, T. de P.; GUIMARÃES JUNIOR, J. B.; MORI, F. A.; MESQUITA, R. G. de A. Análise da qualidade do encolamento de partículas de painéis OSB em condições de laboratório. Cerne, Lavras, v. 20, n. 4, p. 501-508, 2014. Biblioteca(s): Embrapa Florestas. |
| |
20. | | BUFALINO, L.; PROTÁSIO, T. de P.; COUTO, A. M.; NASSUR, O. A. C.; SÁ, V. A. de; TRUGILHO, P. F.; MENDES, L. M. Caracterização química e energética para aproveitamento da madeira de costaneira e desbaste de cedro australiano. Pesquisa Florestal Brasileira, Colombo, v. 32, n. 70, p. 129-137, abr./jun. 2012. Biblioteca(s): Embrapa Florestas. |
| |
Registros recuperados : 31 | |
|
|
| Acesso ao texto completo restrito à biblioteca da Embrapa Amazônia Oriental. Para informações adicionais entre em contato com cpatu.biblioteca@embrapa.br. |
Registro Completo
Biblioteca(s): |
Embrapa Amazônia Oriental. |
Data corrente: |
01/12/2023 |
Data da última atualização: |
01/12/2023 |
Tipo da produção científica: |
Artigo em Periódico Indexado |
Circulação/Nível: |
A - 2 |
Autoria: |
MORAES, L. G.; LIMA, M. D. R.; ASSIS-PEREIRA, G.; GONÇALVES, D. de A.; VIDAURRE, G. B.; BUFALINO, L.; GUEDES, F. T. P.; TOMAZELLO-FILHO, M.; PROTÁSIO, T. de P. |
Afiliação: |
LARISSA GONÇALVES MORAES, UNIVERSIDADE FEDERAL RURAL DA AMAZÔNIA; MICHAEL DOUGLAS ROQUE LIMA, UNIVERSIDADE FEDERAL RURAL DA AMAZÔNIA; GABRIEL ASSIS-PEREIRA, UNIVERSIDADE DE SÃO PAULO; DELMAN DE ALMEIDA GONCALVES, CPATU; GRAZIELA BAPTISTA VIDAURRE, UNIVERSIDADE FEDERAL DO ESPÍRITO SANTO; LINA BUFALINO, UNIVERSIDADE FEDERAL RURAL DA AMAZÔNIA; FERNANDA TRISLTZ PERASSOLO GUEDES, UNIVERSIDADE DE SÃO PAULO; MÁRIO TOMAZELLO-FILHO, UNIVERSIDADE DE SÃO PAULO; THIAGO DE PAULA PROTÁSIO, UNIVERSIDADE FEDERAL RURAL DA AMAZÔNIA. |
Título: |
Forking and planting spacing impacts on wood density, X‑ray density, and heartwood proportion of Tachigali vulgaris. |
Ano de publicação: |
2023 |
Fonte/Imprenta: |
Trees, v. 37, p. 1567-1581, 2023. |
DOI: |
https://doi.org/10.1007/s00468-023-02443-z |
Idioma: |
Inglês |
Conteúdo: |
Promising Amazonia species for forest energy crops require further investigation into how silviculture affects wood quality. This study sought to investigate how planting spacing and stem type (forked and non-forked) affect the basic wood density, X-ray density, and heartwood development of Tachigali vulgaris in a homogeneous plantation in Amazonia. The experiment was established with initial planting spacings of 3.0 × 1.5 m, 3.0 × 2.0 m, 3.0 × 2.5 m, 3.0 × 3.0 m, 3.0 × 3.5 m, and 3.0 × 4.0 m. 102-month-old trees were harvested for the work. Disks sampled along the stem height were tested for wood basic density and density measured by X-ray densitometry (air-dry density by growth ring) analyses. Disks obtained at the 1.3 m height were photographed and submitted to image manipulation for heartwood/sapwood analysis. The lowest average wood density was 0.512 g cm−3 in the 3.0 × 1.5 m spacing, and the highest was 0.538 g cm−3 in the 3.0 × 4.0 m spacing. Among non-forked trees, 66% had medium-density (≥ 0.500 g cm−3) and 34% low-density (< 0.500 g cm−3) wood. In contrast, forked trees had only 55% of trees with medium-density wood. The X-ray density profiles reduced from 0.713 to 0.582 g cm−3 in the increasing longitudinal direction and from 0.393 to 0.973 g cm−3 in the radial direction. Forking did not influence the heartwood proportion (60.03–61.54%). The 3.0 × 3.0 m spacing favored the wood quality concerning density class and variability, while the widest spacings improved heartwood formation. The forking increases the chances of low-density wood and its variations along the stem. Thus, future genetic studies should focus on this phenomenon to increase the productivity of Tachigali vulgaris energy forests. MenosPromising Amazonia species for forest energy crops require further investigation into how silviculture affects wood quality. This study sought to investigate how planting spacing and stem type (forked and non-forked) affect the basic wood density, X-ray density, and heartwood development of Tachigali vulgaris in a homogeneous plantation in Amazonia. The experiment was established with initial planting spacings of 3.0 × 1.5 m, 3.0 × 2.0 m, 3.0 × 2.5 m, 3.0 × 3.0 m, 3.0 × 3.5 m, and 3.0 × 4.0 m. 102-month-old trees were harvested for the work. Disks sampled along the stem height were tested for wood basic density and density measured by X-ray densitometry (air-dry density by growth ring) analyses. Disks obtained at the 1.3 m height were photographed and submitted to image manipulation for heartwood/sapwood analysis. The lowest average wood density was 0.512 g cm−3 in the 3.0 × 1.5 m spacing, and the highest was 0.538 g cm−3 in the 3.0 × 4.0 m spacing. Among non-forked trees, 66% had medium-density (≥ 0.500 g cm−3) and 34% low-density (< 0.500 g cm−3) wood. In contrast, forked trees had only 55% of trees with medium-density wood. The X-ray density profiles reduced from 0.713 to 0.582 g cm−3 in the increasing longitudinal direction and from 0.393 to 0.973 g cm−3 in the radial direction. Forking did not influence the heartwood proportion (60.03–61.54%). The 3.0 × 3.0 m spacing favored the wood quality concerning density class and variability, while the widest spacings improved he... Mostrar Tudo |
Palavras-Chave: |
Energy forests; Tachigali vulgaris. |
Thesagro: |
Floresta; Madeira; Silvicultura. |
Thesaurus NAL: |
Silviculture; Wood quality. |
Categoria do assunto: |
K Ciência Florestal e Produtos de Origem Vegetal |
Marc: |
LEADER 02733naa a2200313 a 4500 001 2159006 005 2023-12-01 008 2023 bl uuuu u00u1 u #d 024 7 $ahttps://doi.org/10.1007/s00468-023-02443-z$2DOI 100 1 $aMORAES, L. G. 245 $aForking and planting spacing impacts on wood density, X‑ray density, and heartwood proportion of Tachigali vulgaris.$h[electronic resource] 260 $c2023 520 $aPromising Amazonia species for forest energy crops require further investigation into how silviculture affects wood quality. This study sought to investigate how planting spacing and stem type (forked and non-forked) affect the basic wood density, X-ray density, and heartwood development of Tachigali vulgaris in a homogeneous plantation in Amazonia. The experiment was established with initial planting spacings of 3.0 × 1.5 m, 3.0 × 2.0 m, 3.0 × 2.5 m, 3.0 × 3.0 m, 3.0 × 3.5 m, and 3.0 × 4.0 m. 102-month-old trees were harvested for the work. Disks sampled along the stem height were tested for wood basic density and density measured by X-ray densitometry (air-dry density by growth ring) analyses. Disks obtained at the 1.3 m height were photographed and submitted to image manipulation for heartwood/sapwood analysis. The lowest average wood density was 0.512 g cm−3 in the 3.0 × 1.5 m spacing, and the highest was 0.538 g cm−3 in the 3.0 × 4.0 m spacing. Among non-forked trees, 66% had medium-density (≥ 0.500 g cm−3) and 34% low-density (< 0.500 g cm−3) wood. In contrast, forked trees had only 55% of trees with medium-density wood. The X-ray density profiles reduced from 0.713 to 0.582 g cm−3 in the increasing longitudinal direction and from 0.393 to 0.973 g cm−3 in the radial direction. Forking did not influence the heartwood proportion (60.03–61.54%). The 3.0 × 3.0 m spacing favored the wood quality concerning density class and variability, while the widest spacings improved heartwood formation. The forking increases the chances of low-density wood and its variations along the stem. Thus, future genetic studies should focus on this phenomenon to increase the productivity of Tachigali vulgaris energy forests. 650 $aSilviculture 650 $aWood quality 650 $aFloresta 650 $aMadeira 650 $aSilvicultura 653 $aEnergy forests 653 $aTachigali vulgaris 700 1 $aLIMA, M. D. R. 700 1 $aASSIS-PEREIRA, G. 700 1 $aGONÇALVES, D. de A. 700 1 $aVIDAURRE, G. B. 700 1 $aBUFALINO, L. 700 1 $aGUEDES, F. T. P. 700 1 $aTOMAZELLO-FILHO, M. 700 1 $aPROTÁSIO, T. de P. 773 $tTrees$gv. 37, p. 1567-1581, 2023.
Download
Esconder MarcMostrar Marc Completo |
Registro original: |
Embrapa Amazônia Oriental (CPATU) |
|
Biblioteca |
ID |
Origem |
Tipo/Formato |
Classificação |
Cutter |
Registro |
Volume |
Status |
Fechar
|
Nenhum registro encontrado para a expressão de busca informada. |
|
|